1932-41 Ford Flathead 3-Bolt Electronic Distributor w/ Plug Wires

Description

This distributor is specially designed for the 1932-41 Flathead Ford V8, Engineered for a simple install and setup, It measures 4" from mount surface to the outside of the cap, The longest spark plug wire is 51", shortest is 24", System does away with finicky, outdated points style ignition system
1932-41 Ford Flathead 3-Bolt Electronic Distributor w/ Plug Wires
Sku # 9108804
Mfr. Part # 9108804
Condition
New
Brand
Speedway Motors
Sold
Kit
Details
Info
Speedway Motors offers this billet aluminum electronic distributor for the fabulous '32-'41 Flathead Ford V8 with the 3-bolt mount along with a set of 7mm suppression spark plug cables. This distributor is a "ready-to-run" unit that does not require a control box. The spark plug wires are black, 7mm suppressive core wire that will go through your looms. The 90° black plug boots are installed but you have to install the straight or 90° distributor ends. Moroso even put in enough wire to place your coil on the firewall. Comes with straight boots for the distributor end of the plug wire.
Kit Includes:
1932-41 Ford Flathead 3-Bolt Electronic Distributor
Simple install and setup
Improves performance and efficiency
Does away with finicky, out-dated points style ignition system
We suggest a 12v coil 447-45001 (chrome) or 447-45011 (black) to be used with this distributor (note when using either of these coils, a ballast resistor is NOT used they meet the distributor's requirements for ohms of resistance).
Specs
Requires a coil with a minimum of 1.4 ohms of resistance
Uses Mallory replacement parts (module, rotor, cap)
Measures 4" from mount surface to the outside of the cap
Will not fit some stock fan configurations (may require the use of an electric fan)
Moroso OE64011 Flathead Universal Spark Plug Wires Kit
Longest wire is 51", shortest is 24"
Includes:
(9) 90 deg. HEI boots/terminals
(9) straight boots/terminals (socket type caps)
(9) 90 deg. boots/terminals (socket type caps)
(1) 90 deg. boot/terminal (conventional coil)
Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.
Charts
(PDF)
Specs
Advance Type
Mechanical
Cap Terminal Style
Socket / Female
Sold in Quantity
Kit
Housing Material
Aluminum
Distributor Cap Color
Maroon
External Ignition Box Required
No
Coil Included
No
Housing Finish
Natural
Notes
12 Volt Application Only
Cap Type
Crab
MFG. Part #
9108804
Reviews
Yss
Rated
by Rick Gibbs on August 12, 2020
Summary:
The quality of this product made this job so much easier. Had a question mid install, was able to talk to flathead expert right then. This product and the coil that speedway recommended has made my 1940 flathead run so much better. 100% satisfied
Yes, I recommend this product.
Related Items / Suggested Parts
PerTronix 40001 Flame-Thrower Coil, Chrome
PerTronix 40011 Flame-Thrower Coil, Black
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.