1957-1958 Cadillac Power Brake Conversion kit New Modern Booster Master Cylinder

Description

This is a complete bolt in kit for 1957 and 1958 Cadillacs. This kit uses a modern power booster and dual circuit master cylinder mounted to the firewall using the bolt holes for the factory air box. It includes a new brake pedal that swings from a different location (looks like it could be original too). A modern GM booster and master cylinder give a significantly improved braking feel and power while adding safety through the
dual circuit
system.
This can be used with factory drums, disc/ drum or disc/ disc.
Let me know what brakes you have at
check
out and I will send the correct proportioning valve.
It will have the pedal feel of a modern car- minimal effort required with a positive and firm feel. No more soft or sloppy pedal!
Installation is fairly straightforward- likely no cutting required, this kit doesn't involve anything permanent that can't be undone in a couple hours! You have to remove the driver side air box, vent door, master cylinder, master cylinder mounting plate, and then this kit bolts in. Brake lines are included and pre-bent but the rear line will require you to splice in to your original system. Installation time is about 4 hours.
This kit comes with everything including proportioning valve, brake lines, and hardware! All you need is brake fluid and a port on your intake to plug into
vacuum.
Also, you will have more room in the valve cover area that the original air box. so it clears all original engines just fine, and will provide additional clearance for vehicles with a swapped engine.
The firewall box has water drain spouts and new drain hose is included. water will be able to drain out from the windshield area just as factory.
What you get:
Firewall box
Brake pedal bracket, goes through air vent hole
Brake pedal W/ Bushings and rubber pad
GM style brake booster
GM style master cylinder
All new high quality bolts
2X 3/16" brake lines- custom cut, bent, and flared
Proportioning Valve + metal lines (mounts beneath MC, pictured)
3/8 Vacuum hose
Water drain hose, same style and function as factory
Misc. hardware
Chrome Parts are available. Brake Booster and Master Cylinder in chrome is +60.
All metal parts are CAD designed and cut on a plasma table for consistent high quality results, mig welded, then painted in black.